Product Overview:
The JDZ-3/6/10Q series voltage transformers are suitable for power systems with a rated frequency of 50Hz or 60Hz and a rated voltage of 3kV to 10kV. They are mainly used for energy metering, voltage monitoring, and relay protection
.
Technical parameters:
Rated primary voltage: 10kV.
Rated secondary voltage: 100V.
Accuracy levels include 0.2 and 0.5, with rated outputs ranging from 15VA to 30VA and limit outputs ranging from 200VA to 400VA. The rated insulation levels are 7.2/32/60kV and 12/42/75kV
.
Normal usage conditions:
Installation location: Indoor.
Environmental temperature: maximum+40 ºC; Minimum -5 ºC.
Altitude: not exceeding 1000m.
Atmospheric conditions: There is no severe pollution in the atmosphere
.
Structure and characteristics:
This type of transformer is a semi cast iron core with an outer core. The primary winding is led out at both ends and equipped with a terminal block, which can be used to connect high-voltage wires
.
The winding of the transformer is an epoxy resin fully vacuum cast fully insulated structure, and the iron core is made of high-quality silicon steel sheets stacked together. The product has a small volume and light weight, and installation only occupies limited space
.
Appearance and installation dimensions:
Specific exterior drawings and installation dimensions can refer to the information provided by the manufacturer or product manual
General
This type of voltage transformer adopts epoxy-resin vacuum casting and a fully closed single-phase structure for indoor use, is applicable for power systems of rated frequency 50Hz or 60Hz and rated voltage up to and including 10kV, used for electric energy metering and voltage measurement.
It complies with the standards GB 20840.1-2010 Instrument transformers-Part1:General requirements, GB 20840.3-2013 Instrument transformers-Part3:Additional requirements for inductive voltage transformers, and JJG314-2010 Instrument Voltage Transformers.
Use environment
- Altitude: should not exceed 1000m
- Ambient temperature:-5ºC~+40ºC
- Air relative humidity:≤85%
- Air relative site: indoor.
Technical parameter
- Insulation level:12/42/75kV, 7.2/30/60kV
- Power factor:cosφ=0.8
- Rated frequency:50Hz or 60Hz
- Weight: 30kg
Technical ratio
| Type |
Rated voltage ratio(V) |
Rated secondary output(VA) |
Max.output(VA) |
Rated insulation level(kV) |
JDZC-6
JDZC-10 |
6000/100/220
10000/100/220 |
0.2/3---30/300 |
500 |
7.2/32/60
12/42/75 |
| 0.5/3---50/300 |
700 |
| 0.2/3---30/400 |
800 |
| 0.5/3---50/400 |
1000 |
| 0.2/3---50/1000 |
2000 |
| 0.5/3---80/1000 |
| 0.2/3---50/1500 |
3000 |
| 0.5/3---80/1500 |
Audited Supplier 
.
){kind=link}