DAHU electrical specializes in the production of 0.5-40.5kv transformers. It has cooperated with many national power bureaus for 10 years and exported to foreign markets. If there is any quality problem within the warranty period, it can be replaced free of charge.

JDZ8-10R type 10KV single-phase fully enclosed and fully insulated fuse cast voltage transformer is a kind of high-voltage voltage transformer suitable for outdoor environment, the following are its main features and technical parameters:
Overview:
JDZ8-10R type voltage transformer is single-phase two coils, epoxy casting, fully insulated, fully enclosed indoor device.
JDZ8-10R type voltage transformer is a single-phase two-coil epoxy casting, fully insulated, fully enclosed indoor device. Applicable to 50Hz, 10kV below the neutral point, non-effective grounding system for voltage, electrical energy, measurement and protection.
It is suitable for voltage, power, measurement and protection in neutral point, non-effective grounding system below 50Hz, 10kV.
Technical parameters:
Rated voltage ratio: 10/0.1kV
Rated voltage ratio: 10/0.1kV.
Rated frequency: 50Hz or 60Hz.
Rated frequency: Hz or 60Hz.
Ambient temperature: -5ºC~+40ºC.
Rated Insulation Level: Normally 12/42/75kV.
Rated insulation level: usually 12/42/75kV.
.

Structural features:
Epoxy resin casting insulation fully enclosed products, suitable for rated voltage 50Hz or 60Hz, rated voltage 10kV and below neutral point non-effective grounding power system, for power measurement, voltage monitoring and relay protection.
The primary protection is with a fused tube.
The primary fuse protection effectively protects the transformer from damage in the event of a grid fault.
The primary is protected by a fuse tube, which effectively protects the transformer from damage in case of grid fault.
Conditions of use:
Installation place: indoor.
Ambient temperature: Maximum +40ºC; Minimum -5ºC.
.
Altitude: no more than 1000m
.
Atmospheric conditions: the atmosphere is free of filth and erosive and explosive media that seriously affect the insulation performance of the transformer.
Maintenance and storage: no serious influence on the insulation performance of the transformer.
Maintenance and storage:
The product does not require frequent maintenance, but during regular maintenance, surface dust should be removed and preventive tests should be carried out
.
The transformer should be stored in a ventilated and dry indoor warehouse to prevent moisture and collision, the temperature of the warehouse should be within the range of -5 ºC, +40 ºC, no corrosive and explosive media in the air.
The temperature of the warehouse should be within the range of -5ºC, +40ºC, and the air should be free from corrosive and explosive media.
JDZ8-10R type voltage transformer with its fully enclosed structure, epoxy resin casting insulation and fuse protection, etc., is very suitable for use in 10kV power system, can provide reliable voltage measurement and protection function.