DAHU electrical specializes in the production of 0.5-40.5kv transformers. It has cooperated with many national power bureaus for 10 years and exported to foreign markets. If there is any quality problem within the warranty period, it can be replaced free of charge.
![Lzzbj9-35 Reinforced 35kv Current Transformer with Protection Grade Casting Insulation Pillar](//www.micstatic.com/athena/img/transparent.png)
Detailed information of LZZBJ9-35 type 35kV reinforced current transformer with protection level cast insulation pillar:
Product Overview:
LZZBJ9-35 type current transformer is suitable for rated frequency of 50Hz, rated voltage of 35kV power system, power supply gas measurements and electrical protection.
.
![Lzzbj9-35 Reinforced 35kv Current Transformer with Protection Grade Casting Insulation Pillar](//www.micstatic.com/athena/img/transparent.png)
![Lzzbj9-35 Reinforced 35kv Current Transformer with Protection Grade Casting Insulation Pillar](//www.micstatic.com/athena/img/transparent.png)
![Lzzbj9-35 Reinforced 35kv Current Transformer with Protection Grade Casting Insulation Pillar](//www.micstatic.com/athena/img/transparent.png)
Detailed information of LZZBJ9-35 type 35kV reinforced current transformer with protection level cast insulation pillar:
Product Overview:
LZZBJ9-35 type current transformer is suitable for rated frequency of 50Hz, rated voltage of 35kV power system, power supply gas measurements and electrical protection.
Product features:
The transformer for the epoxy resin casting fully closed structure, with excellent insulation properties and moisture resistance, is the ideal alternative to oil-immersed transformers
The core is made of microcrystalline alloy or high quality iron.
The core is made of microcrystalline alloy or high-quality magnetically conductive silicon steel sheet wound into a ring, the secondary conductor is uniformly wound on it, and the primary conductor is wrapped with reinforced insulation to avoid turn-to-turn short circuits between conductors.
The primary conductor is wound with reinforced insulation to avoid short circuit between the turns of the conductors.
Technical Parameters:
Rated insulation level: 40.5/95/185kV
.
Various combinations of accurate levels, including 0.2/0.5/10P levels, with rated outputs ranging from 15VA to 112.5VA.
Rated output from 15VA to 112.5VA.
Rated short-time thermal current (RMS) and rated dynamic stabilizing current (peak) also vary according to different combinations of accuracy levels.
.
Conditions of use:
Ambient temperature: maximum 65°C, daily average not to exceed 40°C, minimum -45°C
.
Altitude not exceeding 1000m
.
Installation place: inside 35kV vacuum circuit breaker
![Lzzbj9-35 Reinforced 35kv Current Transformer with Protection Grade Casting Insulation Pillar](//www.micstatic.com/athena/img/transparent.png)
.
Structure Introduction:
Primary and secondary coils are cast in epoxy resin, which has good insulating properties and moisture resistance.
Product Description: The primary and secondary coils are cast in epoxy resin.
Product implementation standard:
The product implementation standard is GB20840.2-2014 current transformer
Product features:
The transformer for the epoxy resin casting fully closed structure, with excellent insulation properties and moisture resistance, is the ideal alternative to oil-immersed transformers
The core is made of microcrystalline alloy or high quality iron.
The core is made of microcrystalline alloy or high-quality magnetically conductive silicon steel sheet wound into a ring, the secondary conductor is uniformly wound on it, and the primary conductor is wrapped with reinforced insulation to avoid turn-to-turn short circuits between conductors.
The primary conductor is wound with reinforced insulation to avoid short circuit between the turns of the conductors.
Technical Parameters:
Rated insulation level: 40.5/95/185kV
.
Various combinations of accurate levels, including 0.2/0.5/10P levels, with rated outputs ranging from 15VA to 112.5VA.
Rated output from 15VA to 112.5VA.
Rated short-time thermal current (RMS) and rated dynamic stabilizing current (peak) also vary according to different combinations of accuracy levels.
.
Conditions of use:
Ambient temperature: maximum 65°C, daily average not to exceed 40°C, minimum -45°C
.
Altitude not exceeding 1000m
.
Installation place: inside 35kV vacuum circuit breaker
.
Structure Introduction:
Primary and secondary coils are cast in epoxy resin, which has good insulating properties and moisture resistance.
Product Description: The primary and secondary coils are cast in epoxy resin.
Product implementation standard:
The product implementation standard is GB20840.2-2014 current transformer